Quad II Tube Amplifiers + Quad 22 Preamplifier

Specifications – Quad 22 Preamplifier

Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.02%
Input sensitivity: 1.5mV (mic), 0.4mV (MM), 70mV (line)
Signal to noise ratio: 70dB (line)
Output: 250mV (line), 1.4V (Pre out)
Valve complement: 2 x EF86, 2 x ECC83

Specifications – Quad II Amplifiers

Power output: 15 watts into 8Ω (mono)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.25%
Input sensitivity: 1.4V
Signal to noise ratio: 80dB
Speaker load impedance: 7Ω to 15Ω
Valve complement: 2 x EF86, 2 x KT66, 1 x GZ32
Dimensions: 13 x 4.75 x 6.5 inches
Weight: 18.25lbs
Finish: stoved steel grey

All units have been restored and serviced
Casework has been resprayed and looks superb
One amplifier has a new mains transformer from Majestic
New GEC tubes in the output stage
Mullard input tubes
All checked over, tested and components replaced where needed
QED power cable with earth cable which goes to the preamp

Quad II Amplifiers & Quad 22 Preamplifier - £1795.00

If you have a high quality audio component that you would like us to consider in part-exchange against any of our stock, then please do contact us with further details.